In order to improve the ion conductivity and alkaline stability of the anion exchange membranes derived from quaternary ammonium poly(ether sulfone)s
a series of new self-crosslinked membranes (CQPES) were successfully prepared from three kinds of aliphatic di-tertiary amines
namely
N
N
N'
N'-tetramethylethylenediamine (TMEDA)
N
N
N'
N'-tetramethyl-1
3-propanediamine (TMPDA) and N
N
N'
N'-tetramethyl-1
6-hexanediamine (TMHDA)
by solution casting.For the CQPES membranes
their properties such as solvent resistance
dimensional stability
mechanical stability
hydrolytic stability as well as alkaline stability were enhanced significantly
while the high ion conductivity was maintained.For example
the membrane of CQPES-H-0.5 (1.45 mmol/g
TMHDA as the cross-linker) showed 43% of water uptake
lower than 10% of size change in in-plane direction at 30℃
and 17 mS/cm and 64 mS/cm of ionic conductivity in water at 30℃ and 90℃
respectively.During the evaluation of stability
21% loss in ionic conductivity after treatment in 4 mol/L NaOH solution for 168 h and 3.8% loss in weight after treatment in 100℃ water for 24 h were found for CQPES-H-0.5 membrane
while 12% and 40% losses were for the uncrosslinked membrane (QPES)
respectively.The excellent performance of CQPES-H-0.5 suggests its potential application in the fuel cell system.
Preparation and Properties of Blend Anion Exchange Membranes Derived from Quaternary Ammonium Poly(aryl ether sulfone)s
Sequenced Quaternized Poly (aryl ether sulfone)-based Anion Exchange Membranes and Their Crosslinking Modification
Preparation and Properties of Densely Cross-linked Fluorinated Poly(arylene ether) Anion Exchange Membranes
Synthetic Strategies towards Anion Exchange Membranes with Polyethylene Backbones
Post-sulfonation for Precisely Controllable Preparation of Main-chain Type Sulfonated Poly(phenylquinoxaline)s and Their Properties for Proton Exchange Membrane
Related Author
No data
Related Institution
Institute of Environmental and Biological Engineering, Nanjing University of Science and Technology
School of Environmental & Biological Engineering, Nanjing University of Science & Technology
College of Materials Science and Engineering, Fuzhou University
Beijing National Laboratory for Molecular Sciences (BNLMS), CAS Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences