Preparation of Regular Polyethylene Hollow Spheres with Supported Z-N Catalysts

Mei-zhou Qi; Zhi-sheng Fu; Zhi-qiang Fan

doi:10.11777/j.issn1000-3304.2016.15320

您当前的位置：

首页 >

文章列表页 >

Preparation of Regular Polyethylene Hollow Spheres with Supported Z-N Catalysts

Research Article | 更新时间：2021-03-19

- Preparation of Regular Polyethylene Hollow Spheres with Supported Z-N Catalysts
- Acta Polymerica Sinica Issue 6, Pages: 783-790(2016)
- 作者机构：
  
  浙江大学高分子科学与工程学系高分子合成与功能构造教育部重点实验室杭州 310027
- 作者简介：
- 基金信息：
- DOI：10.11777/j.issn1000-3304.2016.15320
  CLC：
- Published：2016-6，
  
  Received：17 November 2015，
  
  Revised：11 December 2015，
扫描看全文
Mei-zhou Qi, Zhi-sheng Fu, Zhi-qiang Fan. Preparation of Regular Polyethylene Hollow Spheres with Supported Z-N Catalysts. [J]. Acta Polymerica Sinica (6):783-790(2016)
DOI：

Mei-zhou Qi, Zhi-sheng Fu, Zhi-qiang Fan. Preparation of Regular Polyethylene Hollow Spheres with Supported Z-N Catalysts. [J]. Acta Polymerica Sinica (6):783-790(2016) DOI： 10.11777/j.issn1000-3304.2016.15320.

摘要

采用一种含二酯类内给电子体的氯化镁负载Ziegler-Natta催化剂和三异丁基铝(TIBA)助催化剂

在同一反应器中经常压丙烯预聚和加压下的乙烯与少量丙烯淤浆共聚合两步反应

高效地合成了外径为0.4~3 mm的中空球形聚乙烯粒子

其球形粒子的外表面和内部空腔的内表面均较为平滑

壳层厚度均匀.聚合反应的催化剂效率最高达到7.49 kg/gTi·h·MPa(6.5 kg PE/gCat.).研究了助催化剂种类、助催化剂浓度(Al/Ti摩尔比)和乙烯聚合阶段的丙烯共单体添加量对聚合物粒子形貌的影响

发现采用三乙基铝(TEA)或TEA/TIBA混合物为助催化剂时

虽然聚合物粒子仍呈中空球形形态

但其内部空腔的形状极不规则.以TIBA为助催化剂时

在一定范围内提高Al/Ti比和丙烯添加量均可显著提高催化效率

聚合反应动力学曲线由衰减型变为增长型

但聚合物粒子的中空形貌得以保持.对比丙烯预聚产物的粒子形貌发现

助催化剂含TEA时所得预聚物粒子结构较松散

内部有较多孔隙和裂纹

而改为TIBA后预聚物粒子内部相对致密.

Abstract

Polyethylene hollow spheres with diameters of 0.4-3 mm were synthesized by a two-step slurry polymerization in a single reactor with a spherical MgCl

-supported Ziegler-Natta catalyst activated by triisobutylaluminum (TIBA)

in which the first step was prepolymerization with propylene under 0.1 MPa and the second step was ethylene copolymerization with small amount of propylene under 0.6 MPa at 65℃.The hollow spheres have rather smooth outer and inner surfaces and relatively uniform thickness of the shell layer.Under optimized conditions

the catalyst efficiency of the polymerization reached about 7.49 kg/g Ti·h·MPa(or 6.5 kg PE/g Cat.).The effects of amount of propylene comonomer

cocatalyst concentration (Al/Ti molar ratio) and type of cocatalyst on the particle morphology and polymerization kinetics were investigated.With increasing the Al/Ti molar ratio and the amount of added propylene

the catalytic activity was sharply increased and the particle morphology was further improved

meanwhile the kinetic curve changed from decay type to build-up type.When TEA or TEA/TIBA mixtures were used as the cocatalyst

the inner surface of the central void became rather irregular

though the whole particle was still spherical.The effects of cocatalyst on particle morphology were explained according to a diffusion controlled morphogenesis model based on the morphology of prepolymer particles.

关键词

齐格勒-纳塔催化剂聚乙烯空心球制备

Keywords

Ziegler-Natta catalystPolyethyleneHollow spherePreparation

references

L L Böhm . Angew Chem Inter Ed , 2003 . 42 5010 - 5030.

P Ingram , A Schindler . Makromol Chem , 1968 . 111 267 - 270.

P Galli . Prog Polym Sci , 1994 . 19 959 - 974.

V Kanellopoulos , G Dompazis , B Gustafsson , C Kiparissides . Ind Eng Chem Res , 2004 . 43 5166 - 5180.

Z Grof , J Kosek , M Marek . Aiche J , 2005 . 51 2048 - 2067.

N Senso , S Khaubunsongserm , B Jongsomjit , P Praserthdam . Molecules , 2010 . 15 9323 - 9339.

T McKenna , V Mattioli . Macromol Symp , 2001 . 173 149 - 162.

G Hongmanee , S Sripothongnak , B Jongsomjit , P Praserthdam . J Appl Polym Sci , 2014 . 131 40884 .

R Mehtarani , Z S Fu , Z Q Fan , S T Tu , L F Feng . Ind Eng Chem Res , 2013 . 52 13556 - 13563.

J H Lei , D L Li , H H Wang , G Y Zhou . Polymer , 2011 . 52 602 - 605.

S B Roscoe , J M Frechet , J F Walzer , A J Dias . Science , 1998 . 280 270 - 273.

H Hammawa , S E Wanke . J Appl Polym Sci , 2007 . 104 514 - 527.

Nejad M Hassan , P Ferrari , G Pennini , G Cecchin . J Appl Polym Sci , 2008 . 108 3388 - 3402.

T F McKenna , Martino A Di , G Weickert , J B Soares . Macromol React Eng , 2010 . 4 40 - 64.

Y Fujitsu , H Nakayama , T Uchida , S Yamazaki , K Kimura . J Polym Sci,Part A:Polym Chem , 2013 . 51 780 - 785.

J Jin , B Kim , N Park , S Kang , J H Park , S M Lee , H J Kim , S U Son . Chem Commun , 2014 . 14885 - 14888.

Z S Fu , Q Dong , N Li , Z Q Fan , J T Xu . J Appl Polym Sci , 2006 . 101 2136 - 2143.

Z S Fu , Y Z Zhang , Z Q Fan , J T Xu . J Appl Polym Sci , 2007 . 103 2075 - 2085.

Qi M Z,Zhang B,Fu Z S,Xu J T,Fan Z Q.J Appl Polym Sci,2016,133:43207(1~10)

Q Dong , Z S Fu , J T Xu , Z Q Fan . Eur Polym J , 2007 . 43 3442 - 3451.

B Zhang , Q Dong , Z S Fu , Z Q Fan . Polymer , 2014 . 55 4865 - 4872.

Y V Kissin , R I Mink , T E Nowlin . J Polym Sci,Part A:Polym Chem , 1999 . 37 4255 - 4272.

H R Yang , L T Zhang , Z S Fu , Z Q Fan . J Appl Polym Sci , 2014 . 132 41264 .

T Xu , H R Yang , Z S Fu , Z Q Fan . J Organomet Chem , 2015 . 798 328 - 334.

L T Zhang , Z Q Fan , Z S Fu . Chinese J Polym Sci , 2008 . 26 605 - 610.

Zhang L T,Fan L N,Fan Z Q,Fu Z S.e-Polymer,2010,1-10:no.018

M P McDaniel , E D Schwerdtfeger , M D Jensen . J Catal , 2014 . 314 109 - 116.

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Synthesis of Pyrene Based α-Diimide Nickel Catalysts for Ethylene Polymerization/Copolymerization

Iron Complex Catalysts in Ethylene Reactivity: from Concept to Commercialization

Study on Multi-factor Coupling Aging Kinetics of Polyolefins: Yearly and Monthly Aging Speed Maps

Study on the Relationship between the Orientation Structure of Linear Low-density Polyethylene Cast Film and Barrier Properties

Related Author

No data

Related Institution

Department of Polymer Science and Engineering, University of Science and Technology of China

Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences

Beijing Key Laboratory of Clothing Materials R&D and Assessment, Beijing Engineering Research Center of Textile Nanofiber, School of Materials Design & Engineering, Beijing Institute of Fashion Technology

Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences

Department of Chemical Engineering, Tsinghua University

Postal code：100190
Tel：010-62588927 Email：gfzxb@iccas.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备05002797号-8 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰