Studies on Shape Memory Effect of Polynorbornene/Poly(lactic acid) Blends

Ya Xiao; Ming Qu; Xin-yan Shi

doi:10.11777/j.issn1000-3304.2017.17085

您当前的位置：

首页 >

文章列表页 >

Studies on Shape Memory Effect of Polynorbornene/Poly(lactic acid) Blends

Research Article | 更新时间：2021-01-26

- Studies on Shape Memory Effect of Polynorbornene/Poly(lactic acid) Blends
- Acta Polymerica Sinica Issue 3, Pages: 402-409(2018)
- 作者机构：
  
  青岛科技大学高分子科学与工程学院橡塑材料与工程教育部重点实验室青岛 266042
- 作者简介：
- 基金信息：
- DOI：10.11777/j.issn1000-3304.2017.17085
  CLC：
- Published：20 March 2018，
  
  Received：11 April 2017，
  
  Revised：22 May 2017，
扫描看全文
Ya Xiao, Ming Qu, Xin-yan Shi. Studies on Shape Memory Effect of Polynorbornene/Poly(lactic acid) Blends. [J]. Acta Polymerica Sinica (3):402-409(2018)
DOI：

Ya Xiao, Ming Qu, Xin-yan Shi. Studies on Shape Memory Effect of Polynorbornene/Poly(lactic acid) Blends. [J]. Acta Polymerica Sinica (3):402-409(2018) DOI： 10.11777/j.issn1000-3304.2017.17085.

摘要

将聚降冰片烯（PNB）和聚乳酸（PLA）按照PNB/PLA（80/20）、（70/30）、（60/40）、（50/50）4种不同质量配比进行共混，采用X射线衍射（XRD）、动态力学分析（DMA）、示差扫描量热分析（DSC）等对共混物基本性能进行表征，同时采用DMA-Q800对其形状记忆效应进行探究.结果显示：4种共混物均有明显屈服现象，随着PLA含量的增加，屈服现象越明显；PNB/PLA共混物出现2个玻璃化转变温度（

），且不随共混物配比变化而变化；4种共混物均在2

=18.45º 附近出现特征衍射峰，且其结晶度随PNB含量的减少而降低；随PNB含量的增多4种共混物的形状记忆性能提高.对于PNB/PLA（80/20），在双重形状记忆中，其形状固定率为99.88%，形状恢复率为81.04%；在三重形状记忆中，总固定率和恢复率分别为98.83%和94.26%.

Abstract

Temperature responsive shape memory polymers (SMPs) find important applications in automotive

military

biomedical and other fields. In particular

SMPs responsive to human body temperature are highly desired for biomedical applications. Polynorbornene (PNB) has a

around human body temperature

exhibiting excellent shape memory properties

whereas poly(lactic acid) (PLA) has attracted great interest in biomedical fields due to its nontoxic and bioresorbable characteristics. Therefore

it is of great significance to explore the possibility of combining advantages of PNB and PLA. In this work

a simple blending strategy was adopted at varying weight ratios

and the shape memory

thermal and mechanical properties of the resultant blends were studied. The results showed that PLA promoted blend yield

and crystallization of PNB favored shape fixation and shape recovery. For PNB/PLA=80/20 blend

the shape fixation rate was 99.88% and the shape recovery rate was 81.04% with the average shape recovery rate of 1.2%/min in the double shape memory. The total shape fixation rate and shape recovery rate were 98.83% and 94.26%

respectively

in the triple shape memory. In PNB/PLA blends

there was a certain interaction between the molecules

which limited

to a certain extent

the movement of the two polymer chains and reduced the crystallization of PLA. When the temperature was over 100 ℃

cold crystallization of PLA appeared in the blends

and this cold crystallization degree increased with decreased PNB. With increased PNB content

PNB/PLA blend became more ductile

the elongation at break increased from a few percent to more than 200%

and the forced elastic deformation occurred

which were favorable for the shape fixation. In the blends

the super-macromolecular chains of PNB were intertwined

resulting in a large number of entanglement points

namely

physical cross-linking points in the materials

which could make the polymer chain movement seriously blocked and their wide range of slippage hampered

so as to provide the driving force for the shape recovery and to improve the shape recovery performance of the blends.

关键词

聚降冰片烯聚乳酸形状记忆应力松弛结晶

Keywords

PolynorbornenePoly(lactic acid)Shape memory effectsStress relaxationCrystallization

references

J Hu , Y Zhu , H Huang , J Lu . . Prog Polym Sci , 2012 . 37 ( 12 ): 1720 - 1763 . DOI:10.1016/j.progpolymsci.2012.06.001http://doi.org/10.1016/j.progpolymsci.2012.06.001.

D Ratna , J Karger-Kocsis . . J Mater Sci , 2008 . 43 ( 1 ): 254 - 269 . DOI:10.1007/s10853-007-2176-7http://doi.org/10.1007/s10853-007-2176-7.

Guangming Zhu . . Engineering Plastics Application , 2002 . 30 ( 8 ): 61 - 63 . http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gcslyy200208018.

朱光明 . . 工程塑料应用 , 2002 . 30 ( 8 ): 61 - 63 . http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gcslyy200208018.

F EI Feninat , G Laroche , M Fiset , D Mantovani . . Adv Eng Mater , 2002 . 4 ( 3 ): 91 - 104 . DOI:10.1002/1527-2648(200203)4:3<>1.0.CO;2-Ihttp://doi.org/10.1002/1527-2648(200203)4:3<>1.0.CO;2-I.

A Lendlein , S Kelch . . Angew Chem Int Ed , 2002 . 41 ( 12 ): 2034 - 2057 . DOI:10.1002/1521-3773(20020617)41:12<2034::AID-ANIE2034>3.0.CO;2-Mhttp://doi.org/10.1002/1521-3773(20020617)41:12<2034::AID-ANIE2034>3.0.CO;2-M.

G Liu , X Ding , Y Cao , Z Zheng , Y Peng . . Macromol Rapid Commun , 2005 . 26 ( 8 ): 649 - 652 . DOI:10.1002/(ISSN)1521-3927http://doi.org/10.1002/(ISSN)1521-3927.

C Wischke , A Lendlein . . Pharm Res , 2010 . 27 ( 4 ): 527 - 529 . DOI:10.1007/s11095-010-0062-5http://doi.org/10.1007/s11095-010-0062-5.

S I Gunes , S C Jana . . J Nanosci Nanotechnol , 2008 . 8 ( 4 ): 1616 - 1637 . DOI:10.1166/jnn.2008.038http://doi.org/10.1166/jnn.2008.038.

Bo Song . . Liaoning Chemical Industry , 1986 . ( 6 ): 30 - 34 . http://kns.cnki.net/KCMS/detail/detail.aspx?filename=lnhg198606006&dbname=CJFD&dbcode=CJFQ.

宋波 . . 辽宁化工 , 1986 . ( 6 ): 30 - 34 . http://kns.cnki.net/KCMS/detail/detail.aspx?filename=lnhg198606006&dbname=CJFD&dbcode=CJFQ.

D Yang , W Huang , J Yu , J Jiang , L Zhang , M Xie . . Polymer , 2010 . 51 ( 22 ): 5100 - 5106 . DOI:10.1016/j.polymer.2010.09.009http://doi.org/10.1016/j.polymer.2010.09.009.

D Yang , D Gao , C Zeng , J Jiang , M Xie . . React Funct Polym , 2011 . 71 ( 11 ): 1096 - 1101 . DOI:10.1016/j.reactfunctpolym.2011.08.009http://doi.org/10.1016/j.reactfunctpolym.2011.08.009.

Y Shao , C Lavigueur , X Zhu . . Macromolecules , 2012 . 45 ( 45 ): 1924 - 1930 . http://pubs.acs.org/doi/pdf/10.1021/ma202506b.

Thomas F A Haselwander , W Heitz , Stefan A Krügel , Joachim H Wendorff . . Macromol Chem Phys , 1996 . 197 ( 10 ): 3435 - 3453 . DOI:10.1002/macp.1996.021971029http://doi.org/10.1002/macp.1996.021971029.

Tiejun Shi , Zhixian Dong . . New Chemical Materials , 2001 . 29 ( 5 ): 13 - 16 . http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hgxxcl200105004.

史铁钧 , 董智贤 . . 化工新型材料 , 2001 . 29 ( 5 ): 13 - 16 . http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hgxxcl200105004.

Rong Cheng , Xin Qian . . Chemical Industry and Engineering Progress , 2002 . 21 ( 11 ): 824 - 826 . DOI:10.3321/j.issn:1000-6613.2002.11.007http://doi.org/10.3321/j.issn:1000-6613.2002.11.007.

程蓉 , 钱欣 . . 化工进展 , 2002 . 21 ( 11 ): 824 - 826 . DOI:10.3321/j.issn:1000-6613.2002.11.007http://doi.org/10.3321/j.issn:1000-6613.2002.11.007.

Shuiqing Jin , Hua Xia , Yuerong Liang . . New Chemical Materials , 2007 . 35 ( 1 ): 61 - 63 . http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hgxxcl200701024.

金水清 , 夏华 , 梁悦荣 . . 化工新型材料 , 2007 . 35 ( 1 ): 61 - 63 . http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hgxxcl200701024.

K M Nampoothiri , N R Nair , R P John . . Bioresource Technol , 2010 . 101 ( 22 ): 8493 - 8501 . DOI:10.1016/j.biortech.2010.05.092http://doi.org/10.1016/j.biortech.2010.05.092.

A P Mathew , K Oksman , M Sain . . J Appl Polym Sci , 2005 . 97 ( 5 ): 2014 - 2025 . DOI:10.1002/(ISSN)1097-4628http://doi.org/10.1002/(ISSN)1097-4628.

K Sakurai , T Kashiwagi , T Takahashi . . J Appl Polym Sci , 1993 . 47 ( 5 ): 937 - 940 . DOI:10.1002/app.1993.070470521http://doi.org/10.1002/app.1993.070470521.

X Jing , H Y Mi , X F Peng , L S Turng . . Polym Eng Sci , 2015 . 55 ( 1 ): 70 - 80 . DOI:10.1002/pen.v55.1http://doi.org/10.1002/pen.v55.1.

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Regulating the Crystallization Behaviors of High-molecular-weight Poly(lactic acid) Stereocomplex System Based on the Structure of Poly(ethylene glycol)

Design, Preparation and Visual Detection of Fluorophenyl Polynorbornene Anion Exchange Membrane with Single Quaternary Ammonium Salt

Preparation of Low-shrinkage Polypropylene by Tailoring Crystallization

Related Author

No data

Related Institution

College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering of China, Sichuan University

College of Chemistry and Materials Science, Sichuan Normal University

Department of Chemistry, Tsinghua University

School of Materials Science and Engineering, University of Science and Technology Beijing

College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University

Postal code：100190
Tel：010-62588927 Email：gfzxb@iccas.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备05002797号-8 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰