New Thin-film Solar Cells: Flexible Design and Printing Manufacturing

Xiao-tian Hu; Si-qi Liu; Yan-lin Song; Yi-wang Chen

doi:10.11777/j.issn1000-3304.2023.23019

您当前的位置：

首页 >

文章列表页 >

New Thin-film Solar Cells: Flexible Design and Printing Manufacturing

Feature Article | 更新时间：2023-05-31

- New Thin-film Solar Cells: Flexible Design and Printing Manufacturing
- ACTA POLYMERICA SINICA Vol. 54, Issue 6, Pages: 910-926(2023)
- 作者机构：
  
  1.南昌大学化学化工学院/高分子及能源化学研究院南昌 330031
  2.江西师范大学化学化工学院氟硅能源材料与化学教育部重点实验室南昌 330022
  3.中国科学院化学研究所北京 100190
- 作者简介：
- 基金信息：
- DOI：10.11777/j.issn1000-3304.2023.23019
  CLC：
- Published：20 June 2023，
  
  Published Online：19 April 2023，
  
  Received：19 January 2023，
  
  Accepted：03 March 2023
扫描看全文
胡笑添,刘思奇,宋延林等.新型薄膜太阳电池器件：柔性设计与印刷制造[J].高分子学报,2023,54(06):910-926.

Hu Xiao-tian,Liu Si-qi,Song Yan-lin,et al.New Thin-film Solar Cells: Flexible Design and Printing Manufacturing[J].ACTA POLYMERICA SINICA,2023,54(06):910-926.
胡笑添,刘思奇,宋延林等.新型薄膜太阳电池器件：柔性设计与印刷制造[J].高分子学报,2023,54(06):910-926. DOI： 10.11777/j.issn1000-3304.2023.23019.

Hu Xiao-tian,Liu Si-qi,Song Yan-lin,et al.New Thin-film Solar Cells: Flexible Design and Printing Manufacturing[J].ACTA POLYMERICA SINICA,2023,54(06):910-926. DOI： 10.11777/j.issn1000-3304.2023.23019.

摘要

作为新型薄膜太阳电池的代表，有机/钙钛矿太阳电池的光电转换效率在最近十几年内实现了巨大突破. 同时，由于其质轻、柔韧性好及可溶液法低成本印刷制备等特点，新型薄膜太阳电池还展现出了应用于柔性器件的潜质，结合与其他功能性柔性电子设备的集成设计，可以满足人们对便携式移动电源和可穿戴设备日益增长的物质需求. 作者研究团队近年来围绕柔性薄膜太阳电池集成设计与印刷的关键科学和技术问题，主要针对器件的易脆性和柔性印刷形貌重现性差的问题，开展了系统研究并取得系列创新成果. 本专论中重点介绍了在柔性透明电极的设计、柔性界面工程调控、光电转换活性层柔性增韧设计和大面积柔性印刷策略的研究进展，并对柔性薄膜太阳电池组件的发展进行了展望.

Abstract

As the representative of new thin-film solar cells

the photoelectric conversion efficiency of organic/perovskite solar cells has achieved a great breakthrough in the last decade. At the same time

due to its light-weight

flexibility and low-cost printable preparation by solution process

the new thin-film solar cells also show potential for flexible devices. Combined with other functional flexible electronic devices

the integrated design can meet people's growing living needs for portable mobile power and wearable devices. In recent years

the author's research team focused on the key scientific and technical issues of integrated design and printing of flexible thin-film solar cells

mainly aiming at the problems of the fragility of devices and the poor reproducibility of flexible printing morphology

carried out systematic research and obtained a series of innovative achievements. In this feature article

the design of flexible transparent electrode

the engineering control of flexible interface

the design of flexible toughening of active layer for photoelectric conversion and the strategy of large-area flexible printing are discussed

and the development of flexible thin-film solar cell modules is prospected.

关键词

有机太阳电池钙钛矿光伏柔性电子剪切印刷仿生设计

Keywords

Organic solar cellsPerovskite photovoltaicsFlexible electronicsShear printingBionic design

references

Zhao Y.; Ma F.; Qu Z. H.; Yu S. Q.; Shen T.; Deng H. X.; Chu X. B.; Peng X. X.; Yuan Y. B.; Zhang X. W.; You J. B. Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells. Science, 2022, 377(6605), 531-534. doi:10.1126/science.abp8873http://dx.doi.org/10.1126/science.abp8873

Min H.; Lee D. Y.; Kim J.; Kim G.; Lee K. S.; Kim J.; Paik M. J.; Kim Y. K.; Kim K. S.; Kim M. G.; Shin T. J.; Seok S. I. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes. Nature, 2021, 598(7881), 444-450. doi:10.1038/s41586-021-03964-8http://dx.doi.org/10.1038/s41586-021-03964-8

Zhu L.; Zhang M.; Xu J. Q.; Li C.; Yan J.; Zhou G. Q.; Zhong W. K.; Hao T. Y.; Song J. L.; Xue X. N.; Zhou Z. C.; Zeng R.; Zhu H. M.; Chen C. C.; MacKenzie R. C. I.; Zou Y. C.; Nelson J.; Zhang Y. M.; Sun Y. M.; Liu F. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology. Nat. Mater., 2022, 21(6), 656-663. doi:10.1038/s41563-022-01244-yhttp://dx.doi.org/10.1038/s41563-022-01244-y

Jiang Y. Y.; Dong X. Y.; Sun L. L.; Liu T. F.; Qin F.; Xie C.; Jiang P.; Hu L.; Lu X.; Zhou X. M.; Meng W.; Li N.; Brabec C. J.; Zhou Y. H. An alcohol-dispersed conducting polymer complex for fully printable organic solar cells with improved stability. Nat. Energy, 2022, 7(4), 352-359. doi:10.1038/s41560-022-00997-9http://dx.doi.org/10.1038/s41560-022-00997-9

Li H. Y.; Zuo C. T.; Angmo D. C.; Weerasinghe H.; Gao M.; Yang J. L. Fully roll-to-roll processed efficient perovskite solar cells via precise control on the morphology of PbI2: CsI layer. Nanomicro Lett., 2022, 14(1), 79. doi:10.1007/s40820-022-00815-7http://dx.doi.org/10.1007/s40820-022-00815-7

Yang L.; Feng J. S.; Liu Z. K.; Duan Y. W.; Zhan S.; Yang S. M.; He K.; Li Y.; Zhou Y. W.; Yuan N. Y.; Ding J. N.; Liu S. F. Record-efficiency flexible perovskite solar cells enabled by multifunctional organic ions interface passivation. Adv. Mater., 2022, 34(24), e2201681. doi:10.1002/adma.202201681http://dx.doi.org/10.1002/adma.202201681

Wan J.; Wu Y.; Sun R.; Qiao J. W.; Hao X. T.; Min J. An alloy small molecule acceptor for green printing organic solar cells overcoming the scaling lag of efficiency. Energy Environ. Sci., 2022, 15(12), 5192-5201. doi:10.1039/d2ee03134ehttp://dx.doi.org/10.1039/d2ee03134e

Li M. H.; Zhou J. J.; Tan L. G.; Li H.; Liu Y.; Jiang C. F.; Ye Y. R.; Ding L. M.; Tress W.; Yi C. Y. Multifunctional succinate additive for flexible perovskite solar cells with more than 23% power-conversion efficiency. The Innovation, 2022, 3(6), 100310. doi:10.1016/j.xinn.2022.100310http://dx.doi.org/10.1016/j.xinn.2022.100310

Zheng Z. H.; Li F. M.; Gong J.; Ma Y. Y.; Gu J. W.; Liu X. C.; Chen S. H.; Liu M. Z. Pre-buried additive for cross-layer modification in flexible perovskite solar cells with efficiency exceeding 22%. Adv. Mater., 2022, 34(21), 2109879. doi:10.1002/adma.202109879http://dx.doi.org/10.1002/adma.202109879

Wang Y. L.; Wang X. H.; Lin B. J.; Bi Z. Z.; Zhou X. B.; Naveed H. B.; Zhou K.; Yan H. P.; Tang Z.; Ma W. Achieving balanced crystallization kinetics of donor and acceptor by sequential-blade coated double bulk heterojunction organic solar cells. Adv. Energy Mater., 2020, 10(28), 2000826. doi:10.1002/aenm.202000826http://dx.doi.org/10.1002/aenm.202000826

Zeng G.; Chen W. J.; Chen X. B.; Hu Y.; Chen Y.; Zhang B.; Chen H. Y.; Sun W. W.; Shen Y. X.; Li Y. W.; Yan F.; Li Y. F. Realizing 17.5% efficiency flexible organic solar cells via atomic-level chemical welding of silver nanowire electrodes. J. Am. Chem. Soc., 2022, 144(19), 8658-8668. doi:10.1021/jacs.2c01503http://dx.doi.org/10.1021/jacs.2c01503

Kim Y. Y.; Yang T. Y.; Suhonen R.; Kemppainen A.; Hwang K.; Jeon N. J.; Seo J. Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window. Nat. Commun., 2020, 11(1), 5146. doi:10.1038/s41467-020-18940-5http://dx.doi.org/10.1038/s41467-020-18940-5

Lan Y. J.; Wang Y.; Lai Y.; Cai Z. R.; Tao M. Q.; Wang Y. D.; Li M. Z.; Dong X.; Song Y. L. Thermally driven self-healing efficient flexible perovskite solar cells. Nano Energy, 2022, 100, 107523. doi:10.1016/j.nanoen.2022.107523http://dx.doi.org/10.1016/j.nanoen.2022.107523

Di Giacomo F.; Fakharuddin A.; Jose R.; Brown T. M. Progress, challenges and perspectives in flexible perovskite solar cells. Energy Environ. Sci., 2016, 9(10), 3007-3035. doi:10.1039/c6ee01137chttp://dx.doi.org/10.1039/c6ee01137c

Zheng X. J.; Zuo L. J.; Zhao F.; Li Y. K.; Chen T. Y.; Shan S. Q.; Yan K. R.; Pan Y. W.; Xu B. W.; Li C. Z.; Shi M. M.; Hou J. H.; Chen H. Z. High-efficiency ITO-free organic photovoltaics with superior flexibility and upscalability. Adv. Mater., 2022, 34(17), e2200044. doi:10.1002/adma.202200044http://dx.doi.org/10.1002/adma.202200044

Wang Z.; Lu Y. L.; Xu Z. H.; Hu J. L.; Chen Y. J.; Zhang C. L.; Wang Y. S.; Guo F.; Mai Y. H. An embedding 2D/3D heterostructure enables high-performance FA-alloyed flexible perovskite solar cells with efficiency over 20. Adv. Sci. (Weinh), 2021, 8(22), e2101856. doi:10.1002/advs.202101856http://dx.doi.org/10.1002/advs.202101856

Bu T. L.; Li J.; Li H. Y.; Tian C. C.; Su J.; Tong G. Q.; Ono L. K.; Wang C.; Lin Z. P.; Chai N. Y.; Zhang X. L.; Chang J. J.; Lu J. F.; Zhong J.; Huang W. C.; Qi Y. B.; Cheng Y. B.; Huang F. Z. Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules. Science, 2021, 372(6548), 1327-1332. doi:10.1126/science.abh1035http://dx.doi.org/10.1126/science.abh1035

Bu T. L.; Ono L. K.; Li J.; Su J.; Tong G. Q.; Zhang W.; Liu Y. Q.; Zhang J. H.; Chang J. J.; Kazaoui S.; Huang F. Z.; Cheng Y. B.; Qi Y. B. Modulating crystal growth of formamidinium-caesium perovskites for over 200 cm2 photovoltaic sub-modules. Nat. Energy, 2022, 7(6), 528-536. doi:10.1038/s41560-022-01039-0http://dx.doi.org/10.1038/s41560-022-01039-0

Chen C. S.; Chen J. X.; Han H. C.; Chao L. F.; Hu J. F.; Niu T. T.; Dong H.; Yang S. W.; Xia Y. D.; Chen Y. H.; Huang W. Perovskite solar cells based on screen-printed thin films. Nature, 2022, 612(7939), 266-271. doi:10.1038/s41586-022-05346-0http://dx.doi.org/10.1038/s41586-022-05346-0

Wang Z. G.; Han Y. F.; Yan L. P.; Gong C.; Kang J. C.; Zhang H.; Sun X.; Zhang L. P.; Lin J.; Luo Q.; Ma C. Q. High power conversion efficiency of 13.61for% 1 cm2 flexible polymer solar cells based on patternable and mass-producible gravure-printed silver nanowire electrodes. Adv. Funct. Mater., 2021, 31(4), 2007276. doi:10.1002/adfm.202007276http://dx.doi.org/10.1002/adfm.202007276

Hu X. T.; Chen L.; Zhang Y.; Hu Q.; Yang J. L.; Chen Y. W. Large-scale flexible and highly conductive carbon transparent electrodes via roll-to-roll process and its high performance lab-scale indium tin oxide-free polymer solar cells. Chem. Mater., 2014, 26(21), 6293-6302. doi:10.1021/cm5033942http://dx.doi.org/10.1021/cm5033942

Hu X. T.; Chen L.; Ji T.; Zhang Y.; Hu A. F.; Wu F. Y.; Li G.; Chen Y. W. Roll-to-roll production of graphene hybrid electrodes for high-efficiency, flexible organic photoelectronics. Adv. Mater. Interfaces, 2015, 2(17), 1500445. doi:10.1002/admi.201500445http://dx.doi.org/10.1002/admi.201500445

Hu X. T.; Chen L.; Tan L. C.; Ji T.; Zhang Y.; Zhang L.; Zhang D.; Chen Y. W. In situ polymerization of ethylenedioxythiophene from sulfonated carbon nanotube templates: toward high efficiency ITO-free solar cells. J. Mater. Chem. A, 2016, 4(17), 6645-6652. doi:10.1039/c6ta00287khttp://dx.doi.org/10.1039/c6ta00287k

Hu A. F.; Tan L. C.; Hu X. T.; Hu L.; Ai Q. Y.; Meng X. C.; Chen L.; Chen Y. W. Crystallization and conformation engineering of solution-processed polymer transparent electrodes with high conductivity. J. Mater. Chem. C, 2017, 5(2), 382-389. doi:10.1039/c6tc04446hhttp://dx.doi.org/10.1039/c6tc04446h

Hu X. T.; Meng X. C.; Zhang L.; Zhang Y. Y.; Cai Z. R.; Huang Z. Q.; Su M.; Wang Y.; Li M. Z.; Li F. Y.; Yao X.; Wang F. Y.; Ma W.; Chen Y. W.; Song Y. L. A mechanically robust conducting polymer network electrode for efficient flexible perovskite solar cells. Joule, 2019, 3(9), 2205-2218. doi:10.1016/j.joule.2019.06.011http://dx.doi.org/10.1016/j.joule.2019.06.011

龚陈祥, 程书平, 孟祥川, 胡笑添, 陈义旺. PEDOT导电高分子在柔性能量转化与存储器件的研究进展. 化学学报, 2021, 79(7): 853-868. doi:10.6023/A21030106http://dx.doi.org/10.6023/A21030106

Yang X.; Hu X. T.; Wang Q. X.; Xiong J.; Yang H. J.; Meng X. C.; Tan L. C.; Chen L.; Chen Y. W. Large-scale stretchable semiembedded copper nanowire transparent conductive films by an electrospinning template. ACS Appl. Mater. Interfaces, 2017, 9(31), 26468-26475. doi:10.1021/acsami.7b08606http://dx.doi.org/10.1021/acsami.7b08606

Wang Q. X.; Hu X. T.; Yang X.; Liu G. L.; Meng X. C.; Xie Y. P.; Xiao Y. B.; Liu J. L.; Tan L. C.; Chen Y. W. Large-scale ultra-adhesive and mechanically flexible silver grids transparent electrodes by solution process. Org. Electron., 2018, 61, 296-303. doi:10.1016/j.orgel.2018.06.007http://dx.doi.org/10.1016/j.orgel.2018.06.007

Hu X. T.; Chen L.; Tan L. C.; Zhang Y.; Hu L.; Xie B.; Chen Y. W. Versatile MoS2 nanosheets in ITO-free and semi-transparent polymer power-generating glass. Sci. Rep., 2015, 5, 12161. doi:10.1038/srep12161http://dx.doi.org/10.1038/srep12161

Chen W. P.; Zhang R. J.; Yang X.; Wang H. Y.; Yang H. J.; Hu X. T.; Zhang S. H. A 1D: 2D structured AgNW: MXene composite transparent electrode with high mechanical robustness for flexible photovoltaics. J. Mater. Chem. C, 2022, 10(22), 8625-8633. doi:10.1039/d2tc01178fhttp://dx.doi.org/10.1039/d2tc01178f

Hu X. T.; Meng X. C.; Xiong J.; Huang Z. Q.; Yang X.; Tan L. C.; Chen Y. W. Roll-to-roll fabrication of flexible orientated graphene transparent electrodes by shear force and one-step reducing post-treatment. Adv. Mater. Technol., 2017, 2(12), 1700138. doi:10.1002/admt.201700138http://dx.doi.org/10.1002/admt.201700138

Meng X. C.; Hu X. T.; Yang X.; Yin J. P.; Wang Q. X.; Huang L. Q.; Yu Z.; Hu T.; Tan L. C.; Zhou W. H.; Chen Y. W. Roll-to-roll printing of meter-scale composite transparent electrodes with optimized mechanical and optical properties for photoelectronics. ACS Appl. Mater. Interfaces, 2018, 10(10), 8917-8925. doi:10.1021/acsami.8b00093http://dx.doi.org/10.1021/acsami.8b00093

Gong C. X.; Zhang L.; Meng X. C.; Xing Z.; Rao L.; Wang H. Y.; Huang Z. Q.; Tan L. C.; Hu T.; Hu X. T.; Chen Y. W. A non-wetting and conductive polyethylene dioxothiophene hole transport layer for scalable and flexible perovskite solar cells. Sci. China Chem., 2021, 64(5), 834-843. doi:10.1007/s11426-020-9951-1http://dx.doi.org/10.1007/s11426-020-9951-1

Hu X. T.; Chen L.; Chen Y. W. Universal and versatile MoO3-based hole transport layers for efficient and stable polymer solar cells. J. Phys. Chem. C, 2014, 118(19), 9930-9938. doi:10.1021/jp501995thttp://dx.doi.org/10.1021/jp501995t

Zhang S. H.; Wang H. Y.; Duan X.; Rao L.; Gong C. X.; Fan B. J.; Xing Z.; Meng X. C.; Xie B.; Hu X. T. Printable and homogeneous NiOx hole transport layers prepared by a polymer-network gel method for large-area and flexible perovskite solar cells. Adv. Funct. Mater., 2021, 31(47), 2106495. doi:10.1002/adfm.202106495http://dx.doi.org/10.1002/adfm.202106495

Wang H. Y.; Huang Z. Q.; Xiao S. Q.; Meng X. C.; Xing Z.; Rao L.; Gong C. X.; Wu R. S.; Hu T.; Tan L. C.; Hu X. T.; Zhang S. H.; Chen Y. W. An in situ bifacial passivation strategy for flexible perovskite solar module with mechanical robustness by roll-to-roll fabrication. J. Mater. Chem. A, 2021, 9(9), 5759-5768. doi:10.1039/d0ta12067ghttp://dx.doi.org/10.1039/d0ta12067g

Xie B.; Zhang Y. L.; Li Y.; Chen W. L.; Hu X. T.; Zhang S. H. Solution preparation of molybdenum oxide on graphene: a hole transport layer for efficient perovskite solar cells with a 1.12 V high open-circuit voltage. J. Mater. Sci. Mater. Electron., 2020, 31(8), 6248-6254. doi:10.1007/s10854-020-03179-zhttp://dx.doi.org/10.1007/s10854-020-03179-z

Yang X.; Yang H. J.; Hu X. T.; Li W. T.; Fang Z. M.; Zhang K. F.; Huang R.; Li J. M.; Yang Z.; Song Y. L. Low-temperature interfacial engineering for flexible CsPbI2Br perovskite solar cells with high performance beyond 15%. J. Mater. Chem. A, 2020, 8(10), 5308-5314. doi:10.1039/c9ta13922bhttp://dx.doi.org/10.1039/c9ta13922b

Wu X. T.; Liu S. Q.; Li H. J.; Meng X. C.; Hu X. T.; Guo R.; Chen Y. W. High light-utilization-efficiency organic photovoltaic windows with over 40% transmittance enabled by a printable bionic photonic reflector. Adv. Opt. Mater., 2022, 10(23), 2201803. doi:10.1002/adom.202201803http://dx.doi.org/10.1002/adom.202201803

Liu C.; Tu J.; Hu X. T.; Huang Z. Q.; Meng X. C.; Yang J.; Duan X. P.; Tan L. C.; Li Z.; Chen Y. W. Hole transportation: enhanced hole transportation for inverted tin-based perovskite solar cells with high performance and stability. Adv. Funct. Mater., 2019, 29(18), 1970117. doi:10.1002/adfm.201970117http://dx.doi.org/10.1002/adfm.201970117

Zhang R. J.; Huang Z. Q.; Chen W. P.; Lyu B. Z.; Zhang H.; He X. J.; Hu X. T.; Song Y. L.; Choy W. C. H. A self-assembled vertical-gradient and well-dispersed MXene structure for flexible large-area perovskite modules. Adv. Funct. Mater., 2023, 33(5), 2210063. doi:10.1002/adfm.202210063http://dx.doi.org/10.1002/adfm.202210063

Hu X. T.; Huang Z. Q.; Zhou X.; Li P. W.; Wang Y.; Huang Z. D.; Su M.; Ren W. J.; Li F. Y.; Li M. Z.; Chen Y. W.; Song Y. L. Wearable large-scale perovskite solar-power source via nanocellular scaffold. Adv. Mater., 2017, 29(42), 1703236. doi:10.1002/adma.201703236http://dx.doi.org/10.1002/adma.201703236

Meng X. C.; Cai Z. R.; Zhang Y. Y.; Hu X. T.; Xing Z.; Huang Z. Q.; Huang Z. D.; Cui Y. J.; Hu T.; Su M.; Liao X. F.; Zhang L.; Wang F. Y.; Song Y. L.; Chen Y. W. Bio-inspired vertebral design for scalable and flexible perovskite solar cells. Nat. Commun., 2020, 11(1), 3016. doi:10.1038/s41467-020-16831-3http://dx.doi.org/10.1038/s41467-020-16831-3

Xu G. D.; Hu X. T.; Liao X. F.; Chen Y. W. Bending-stability interfacial layer as dual electron transport layer for flexible organic photovoltaics. Chinese J. Polym. Sci., 2021, 39(11), 1441-1447. doi:10.1007/s10118-021-2586-zhttp://dx.doi.org/10.1007/s10118-021-2586-z

Huang Z. Q.; Hu X. T.; Liu C.; Meng X. C.; Huang Z. D.; Yang J.; Duan X. P.; Long J.; Zhao Z. P.; Tan L. C.; Song Y. L.; Chen Y. W. Water-resistant and flexible perovskite solar cells via a glued interfacial layer. Adv. Funct. Mater., 2019, 29(37), 1902629. doi:10.1002/adfm.201902629http://dx.doi.org/10.1002/adfm.201902629

Meng X. C.; Hu X. T.; Zhang Y. Y.; Huang Z. Q.; Xing Z.; Gong C. X.; Rao L.; Wang H. Y.; Wang F. Y.; Hu T.; Tan L. C.; Song Y. L.; Chen Y. W. A biomimetic self-shield interface for flexible perovskite solar cells with negligible lead leakage. Adv. Funct. Mater., 2021, 31(52), 2106460. doi:10.1002/adfm.202106460http://dx.doi.org/10.1002/adfm.202106460

Xue T. Y.; Chen G. S.; Hu X. T.; Su M.; Huang Z. Q.; Meng X. C.; Jin Z.; Ma J. L.; Zhang Y. Q.; Song Y. L. Mechanically robust and flexible perovskite solar cells via a printable and gelatinous interface. ACS Appl. Mater. Interfaces, 2021, 13(17), 19959-19969. doi:10.1021/acsami.1c00813http://dx.doi.org/10.1021/acsami.1c00813

Fan B. J.; Xiong J.; Zhang Y. Y.; Gong C. X.; Li F.; Meng X. C.; Hu X. T.; Yuan Z. Y.; Wang F. Y.; Chen Y. W. A bionic interface to suppress the coffee-ring effect for reliable and flexible perovskite modules with a near-90% yield rate. Adv. Mater., 2022, 34(29), e2201840. doi:10.1002/adma.202201840http://dx.doi.org/10.1002/adma.202201840

Huang Z. Q.; Hu X. T.; Liu C.; Tan L. C.; Chen Y. W. Solar cells: nucleation and crystallization control via polyurethane to enhance the bendability of perovskite solar cells with excellent device performance. Adv. Funct. Mater., 2017, 27(41), 1703061. doi:10.1002/adfm.201703061http://dx.doi.org/10.1002/adfm.201703061

Hu X. T.; Huang Z. Q.; Li F. Y.; Su M.; Huang Z. D.; Zhao Z. P.; Cai Z. R.; Yang X.; Meng X. C.; Li P. W.; Wang Y.; Li M. Z.; Chen Y. W.; Song Y. L. Nacre-inspired crystallization and elastic "brick-and-mortar" structure for a wearable perovskite solar module. Energy Environ. Sci., 2019, 12(3), 979-987. doi:10.1039/c8ee01799ahttp://dx.doi.org/10.1039/c8ee01799a

Meng X. C.; Xing Z.; Hu X. T.; Huang Z. Q.; Hu T.; Tan L. C.; Li F. Y.; Chen Y. W. Stretchable perovskite solar cells with recoverable performance. Angew. Chem. Int. Ed., 2020, 59(38), 16602-16608. doi:10.1002/anie.202003813http://dx.doi.org/10.1002/anie.202003813

Xue T. Y.; Huang Z. Q.; Zhang P.; Su M.; Hu X. T.; Wu T. Q.; Fan B. J.; Chen G. S.; Yu G. H.; Liu W. T.; Liu X. Y.; Zhang Y. Q.; Song Y. L. A shape memory scaffold for body temperature self-repairing wearable perovskite solar cells with efficiency exceeding 21%. InfoMat, 2022, 4(12), e12358. doi:10.1002/inf2.12358http://dx.doi.org/10.1002/inf2.12358

Li F.; Gong C. X.; Fan B. J.; Xing Z.; Meng X. C.; Zhang S. H.; Hu X. T.; Chen Y. W. 3D network-assisted crystallization for fully printed perovskite solar cells with superior irradiation stability. Adv. Funct. Mater., 2022, 32(39), 2206412. doi:10.1002/adfm.202206412http://dx.doi.org/10.1002/adfm.202206412

Xue T. Y.; Chen D.; Su M.; Hu X. T.; Huang Z. Q.; Wu T. Q.; Yu G. H.; Jiang K. J.; Zhang Y. Q.; Song Y. L. Macromonomer crosslinking polymerized scaffolds for mechanically robust and flexible perovskite solar cells. J. Mater. Chem. A, 2022, 10(36), 18762-18772. doi:10.1039/d2ta04502hhttp://dx.doi.org/10.1039/d2ta04502h

Hu X. T.; Meng X. C.; Yang X.; Huang Z. Q.; Xing Z.; Li P. W.; Tan L. C.; Su M.; Li F. Y.; Chen Y. W.; Song Y. L. Cementitious grain-boundary passivation for flexible perovskite solar cells with superior environmental stability and mechanical robustness. Sci. Bull., 2021, 66(6), 527-535. doi:10.1016/j.scib.2020.10.023http://dx.doi.org/10.1016/j.scib.2020.10.023

Rao L.; Meng X. C.; Xiao S. Q.; Xing Z.; Fu Q. X.; Wang H. Y.; Gong C. X.; Hu T.; Hu X. T.; Guo R.; Chen Y. W. Wearable tin-based perovskite solar cells achieved by a crystallographic size effect. Angew. Chem. Int. Ed., 2021, 60(26), 14693-14700. doi:10.1002/anie.202104201http://dx.doi.org/10.1002/anie.202104201

Guo R.; Rao L.; Liu Q. J.; Wang H. Y.; Gong C. X.; Fan B. J.; Xing Z.; Meng X. C.; Hu X. T. Atmospheric stable and flexible Sn-based perovskite solar cells via a bio-inspired antioxidative crystal template. J. Energy Chem., 2022, 66, 612-618. doi:10.1016/j.jechem.2021.09.013http://dx.doi.org/10.1016/j.jechem.2021.09.013

Huang Z. Q.; Hu X. T.; Zhao Z. P.; Meng X. C.; Su M.; Xue T. Y.; Chi J. M.; Xie H. F.; Cai Z. R.; Chen Y. W.; Li L.; Song Y. L. Releasing nanocapsules for high-throughput printing of stable perovskite solar cells. Adv. Energy Mater., 2021, 11(34), 2170132. doi:10.1002/aenm.202170132http://dx.doi.org/10.1002/aenm.202170132

Yang X.; Yang H. J.; Su M.; Zhao J. M.; Meng X. C.; Hu X. T.; Xue T. Y.; Huang Z. Q.; Lu Y.; Li Y. Z.; Yang Z. Scalable flexible perovskite solar cells based on a crystalline and printable template with intelligent temperature sensitivity. Sol. RRL, 2022, 6(4), 2100991. doi:10.1002/solr.202100991http://dx.doi.org/10.1002/solr.202100991

Meng X. C.; Zhang L.; Xie Y. P.; Hu X. T.; Xing Z.; Huang Z. Q.; Liu C.; Tan L. C.; Zhou W. H.; Sun Y. M.; Ma W.; Chen Y. W. A general approach for lab-to-manufacturing translation on flexible organic solar cells. Adv. Mater., 2019, 31(41), e1903649. doi:10.1002/adma.201970294http://dx.doi.org/10.1002/adma.201970294

Liu S. Q.; Chen D.; Hu X. T.; Xing Z.; Wan J.; Zhang L.; Tan L. C.; Zhou W. H.; Chen Y. W. Printable and large-area organic solar cells enabled by a ternary pseudo-planar heterojunction strategy. Adv. Funct. Mater., 2020, 30(36), 2003223. doi:10.1002/adfm.202003223http://dx.doi.org/10.1002/adfm.202003223

Li H. J.; Liu S. Q.; Wu X. T.; Qi Q. C.; Zhang H. Y.; Meng X. C.; Hu X. T.; Ye L.; Chen Y. W. A general enlarging shear impulse approach to green printing large-area and efficient organic photovoltaics. Energy Environ. Sci., 2022, 15(5), 2130-2138. doi:10.1039/d2ee00639ahttp://dx.doi.org/10.1039/d2ee00639a

Liu S. Q.; Li H. J.; Wu X. T.; Chen D.; Zhang L.; Meng X. C.; Tan L. C.; Hu X. T.; Chen Y. W. Pseudo-planar heterojunction organic photovoltaics with optimized light utilization for printable solar windows. Adv. Mater., 2022, 34(23), e2201604. doi:10.1002/adma.202201604http://dx.doi.org/10.1002/adma.202201604

Chen D.; Liu S. Q.; Hu X. T.; Wu F. Y.; Liu J. B.; Zhou K. K.; Ye L.; Chen L.; Chen Y. W. Printable and stable all-polymer solar cells based on non-conjugated polymer acceptors with excellent mechanical robustness. Sci. China Chem., 2022, 65(1), 182-189. doi:10.1007/s11426-021-1094-yhttp://dx.doi.org/10.1007/s11426-021-1094-y

Zhang L.; Zhao H.; Yuan J.; Lin B. J.; Xing Z.; Meng X. C.; Ke L. L.; Hu X. T.; Ma W.; Yuan Y. B. Blade-coated efficient and stable large-area organic solar cells with optimized additive. Org. Electron., 2020, 83, 105771. doi:10.1016/j.orgel.2020.105771http://dx.doi.org/10.1016/j.orgel.2020.105771

Zhang L.; Yang S. Z.; Ning B. C.; Yang F.; Deng W.; Xing Z.; Bi Z. Z.; Zhou K.; Zhang Y.; Hu X. T.; Yang B.; Yang J. L.; Zou Y. P.; Ma W.; Yuan Y. B. Modulation of vertical component distribution for large-area thick-film organic solar cells. Sol. RRL, 2022, 6(1), 2100838. doi:10.1002/solr.202100838http://dx.doi.org/10.1002/solr.202100838

Meng X. C.; Xing Z.; Hu X. T.; Chen Y. W. Large-area flexible organic solar cells: printing technologies and modular design. Chinese J. Polym. Sci., 2022, 40(12), 1522-1566. doi:10.1007/s10118-022-2803-4http://dx.doi.org/10.1007/s10118-022-2803-4

Li H. J.; Liu S. Q.; Wu X. T.; Yao S. Y.; Hu X. T.; Chen Y. W. Advances in the device design and printing technology for eco-friendly organic photovoltaics. Energy Environ. Sci., 2023, 16(1), 76-88. doi:10.1039/d2ee03246ehttp://dx.doi.org/10.1039/d2ee03246e

Huang Z. Q.; Hu X. T.; Xing Z.; Meng X. C.; Duan X. P.; Long J.; Hu T.; Tan L. C.; Chen Y. W. Stabilized and operational PbI2 precursor ink for large-scale perovskite solar cells via two-step blade-coating. J. Phys. Chem. C, 2020, 124(15), 8129-8139. doi:10.1021/acs.jpcc.0c00908http://dx.doi.org/10.1021/acs.jpcc.0c00908

Xing Z.; Lin S. Y.; Meng X. C.; Hu T.; Li D. X.; Fan B. J.; Cui Y. J.; Li F. Y.; Hu X. T.; Chen Y. W. A highly tolerant printing for scalable and flexible perovskite solar cells. Adv. Funct. Mater., 2021, 31(50), 2107726. doi:10.1002/adfm.202107726http://dx.doi.org/10.1002/adfm.202107726

Gong C. X.; Fan B. J.; Li F.; Xing Z.; Meng X. C.; Hu T.; Hu X. T.; Chen Y. W. An enhanced couette flow printing strategy to recover efficiency losses by area and substrate differences in perovskite solar cells. Energy Environ. Sci., 2022, 15(10), 4313-4322. doi:10.1039/d2ee00966hhttp://dx.doi.org/10.1039/d2ee00966h

Guo S. S.; Liu K. K.; Rao L.; Hu X. T.; Chen Y. W. Preparation of perovskite solar cells in the air: degradation mechanism and prospects on large-area fabrication. Chinese J. Chem., 2023, 41(5), 599-617. doi:10.1002/cjoc.202200442http://dx.doi.org/10.1002/cjoc.202200442

更多指标>

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and Synthesis of Wide-bandgap Conjugated Polymers Based on 3,4-Dicyanothiophene for Efficient Organic Solar Cells

Design, Synthesis and Properties of Self-healing Luminescent Elastomers with Hydrogen-bonded Side-chain-modified Conjugated Polymer Backbones

Flexible Integration and Wearable Application of Belt-Type Human Microenvironment Visualization Monitoring System

Related Author

No data

Related Institution

Institute of Materials for Optoelectronics and New Energy, School of Materials Science and Engineering, Wuhan Institute of Technology

Institute of Polymer Optoelectronic Materials & Devices, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology

School of Textile Materials and Engineering, Wuyi University

State Key Laboratory of Organic Electronics and Information Displays, Institute of Advanced Materials, School of Chemistry and Life Sciences, Nanjing University of Posts & Telecommunications

江西师范大学氟硅能源材料与化学教育部重点实验室

Postal code：100190
Tel：010-62588927 Email：gfzxb@iccas.ac.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备05002797号-8 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰