Poly(1-butene) was modified with rare earth -nucleating agents which were introduced in situ during bulk polymerization of 1-butene.The influence of nucleating agent amount on the molecular weight
melting temperature (Tm)
degree of crystallinity (c)
and crystallization behavior of resulting poly(1-butene) was investigated in detail by gel permeation chromatography (GPC)
differential scanning calorimeter (DSC)
polarizing microscopy (POM)
and wide angle X-ray diffraction (WAXD).The results show that with the increase of nucleating agent content the isotacticity of poly(1-butene) was slightly increased
the number-average molecular weight (Mn) was obviously improved and the molecular weight distribution was narrowed while the activity of Ziegler-Natta catalyst was somewhat decreased.The addition of rare earth -nucleating agents changed the crystallization behavior of polymers
the spherulite size of nucleated poly(1-butene) dramatically decreased compared with that of pure poly(1-butene) and tends to homogenization with the increasing of nucleating agents content
the c of poly(1-butene) is improved
especially when the addition of -nucleating agents is 300 mg
but dropped dramatically after this point.In addition
the rare earth -nucleating agents not only play an positive role in improving Tm by changing the proportion of forms Ⅰ' and Ⅲ
but also speed up the transformation of crystalline form from Ⅱ to Ⅰ
STUDIES ON AMINOSILANE COMPOUNDS AS EXTERNAL ELECTRON DONORS IN 1-BUTENE POLYMERIZATION
Preparation of Low-shrinkage Polypropylene by Tailoring Crystallization
Preparation of High Performance Dielectric Elastomers by Tailoring the Aggregation Structure of Polyurethane
The Effect of Lamellar Thickness of iPP on the Formation of Trigonal Modification of PB-1 under Confinement Environment
Regulating the Crystallization Behaviors of High-molecular-weight Poly(lactic acid) Stereocomplex System Based on the Structure of Poly(ethylene glycol)
Related Author
No data
Related Institution
Institute of Polymer Science and Engineering, School of Chemical Engineering &amp&nbsp
Joint Laboratory of Polymer Science and Materials,Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences
Institute of Green Chemical Technology, School of Chemical Engineering &amp&nbsp
College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University
SINOPEC Beijing Research Institute of Chemical Industry