A novel method for preparation of magnetic composite microspheres was developed by emulsifier-free emulsion polymerization controlled by 1

1diphenylethylene (DPE) as free radical polymerization control agent.This paper reported the synthesis of clean composite microspheres with high magnetite content and carboxylic surface by this method.The synthetic strategy is a two-step polymerization.First

some amount of acrylic acid(AA)

methyl methacrylate (MMA) and DPE reacted for a few minutes in the presence of persulfate potassium (KPS) as initiator.Subsequently

Fe3O4/SiO2 magnetic fluid prepared by surface modification of Fe3O4 nanoparticles with ethyl orthosilicate was added

and the mixture was further polymerized for another time period.Then the system was cooled down to room temperature.The reaction stopped and a precursor polymer which possessed amphiphilic nature and DPE-capped chains was obtained.One end of the precursor polymer chain was linked to the surface of magnetic fluid through chemical adsorption.This not only improved the hydrophobicity of magnetic fluid surface

which stabilized inorganic particles in oil monomers

but also immobilized the potential active species on the surface of nanoparticles.Secondly

the system was heated to a desired temperature and styrene(St) was added to the mixture.The DPEcontaining precursor polymer was activated and initiated the monomer polymerization on the surface of magnetic nanoparticles.After a desired reaction time

some amount of acrylic acid was introduced to the system and polymerized for additional hours.At last Fe3O4/SiO2/P(AA-MMA-St) magnetic composite microspheres were obtained.The chemical structure of magnetic fluid and composite microspheres were characterized by Fourier transform infrared spectrometer (FTIR)

X-ray photoelectron spectra (XPS).The carboxyl content on the surface of composite microspheres was determined by conductometric titration.The thermoanalysis of composite microspheres was conducted by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA).The morphologies of magnetic fluid and composite microspheres were observed under a transmission electron microscope (TEM).Particle size determination of composite microspheres was conducted on a laser particle analyzer.The magnetic properties of all magnetic particles obtained were evaluated by using a vibrating-sample magnetometer (VSM).The results of FTIR and XPS indicated the hydrolysate of ethyl orthosilicate formed SiO2 layers on the surface of Fe3O4 nanoparticles.The SiO2 layer made the saturation magnetization of Fe3O4/SiO2 fall by 3.7% in contrast with Fe3O4

but it prevented Fe3O4 from reacting with —COOH group

and improved the magnetic property of Fe3O4/SiO2/P(AA-MMA-St) by 28% compared with Fe3O4/P(AA-MMA-St) obtained at the same experimental conditions.The TEM observation suggested the composite microspheres possessed core-shell structure.The particle size measurements disclosed the average diameter of composite microspheres was 422 nm and the particle size distribution was narrow

which indicated all the monomers polymerization on the surface of magnetic nanoparticles were controlled effectively by DPE.The TGA analysis revealed the content of inorganic particle (Fe3O4/SiO2) was about 40% in composite microspheres.The magnetic property evaluation indicated the saturation magnetization of Fe3O4/P(AA-MMA-St) was 34.850 emu/g.The conductometric titration result demonstrated the content of carboxyl group on composite microspheres surface was 0.176 mmol/g.DSC analysis showed the glass transition temperature of Fe3O4/SiO2/P(AA-MMA-St) increased by 8.9℃ compared with the copolymer of P(AA-MMA-St)

which confirmed there was interaction between the core of magnetic nanoparticles and the shell of copolymer.