EFFECT OF INTERMOLECULAR HYDROGEN-BONDING ON CRYSTALLIZATION, MELTING AND DYNAMIC MECHANICAL BEHAVIOR OF POLY (BUTYLENE SUCCINATE) IN POLY (BUTYLENE SUCCINATE) /BISPHENOL A BLENDS
返回论文页
Research Article|更新时间:2021-03-19
|
EFFECT OF INTERMOLECULAR HYDROGEN-BONDING ON CRYSTALLIZATION, MELTING AND DYNAMIC MECHANICAL BEHAVIOR OF POLY (BUTYLENE SUCCINATE) IN POLY (BUTYLENE SUCCINATE) /BISPHENOL A BLENDS
EFFECT OF INTERMOLECULAR HYDROGEN-BONDING ON CRYSTALLIZATION, MELTING AND DYNAMIC MECHANICAL BEHAVIOR OF POLY (BUTYLENE SUCCINATE) IN POLY (BUTYLENE SUCCINATE) /BISPHENOL A BLENDS. [J]. Acta Polymerica Sinica (2):132-138(2011)
DOI:
EFFECT OF INTERMOLECULAR HYDROGEN-BONDING ON CRYSTALLIZATION, MELTING AND DYNAMIC MECHANICAL BEHAVIOR OF POLY (BUTYLENE SUCCINATE) IN POLY (BUTYLENE SUCCINATE) /BISPHENOL A BLENDS. [J]. Acta Polymerica Sinica (2):132-138(2011) DOI: 10.3724/SP.J.1105.2011.10001.
EFFECT OF INTERMOLECULAR HYDROGEN-BONDING ON CRYSTALLIZATION, MELTING AND DYNAMIC MECHANICAL BEHAVIOR OF POLY (BUTYLENE SUCCINATE) IN POLY (BUTYLENE SUCCINATE) /BISPHENOL A BLENDS
In order to investigate the effects of low molecular weight organic additives containing phenol hydroxyl group on the crystallization
melting and mechanical properties of biodegradable aliphatic polyester
poly (butylene succinate) (PBS) and bisphenol A (BAP) were selected to blend via solution mixing method.Then 13C-NMR spectroscopy was used to probe the interaction between PBS and BPA
and the effects of BPA on the crystallization
melting
glassy transition temperature (Tg) and dynamic mechanical properties were investigated using DSC (differential scanning calorimetry) and DMTA (dynamic mechanical thermal nalysis) .The results indicate that hydrogen-bonding was formed between phenol hydroxyls in BPA and ester groups in PBS chain
leading to the decrease of crystallization ability and melting point for PBS
which is attributed to the formation of PBS-BPA complexes via intermolecular hydrogen-bonding that disrupts the regularity of the PBS chain structure.The storage modulus of PBS-BPA complexes decreases with the increase of BPA content above the glassy transition temperature due the decreasing of crystallization ability for PBS
while the maximun position of the loss factor shifts to high temperature.
Preparation of Low-shrinkage Polypropylene by Tailoring Crystallization
Preparation of High Performance Dielectric Elastomers by Tailoring the Aggregation Structure of Polyurethane
The Effect of Lamellar Thickness of iPP on the Formation of Trigonal Modification of PB-1 under Confinement Environment
Regulating the Crystallization Behaviors of High-molecular-weight Poly(lactic acid) Stereocomplex System Based on the Structure of Poly(ethylene glycol)
Study on the Relationship between the Orientation Structure of Linear Low-density Polyethylene Cast Film and Barrier Properties
Related Author
No data
Related Institution
SINOPEC Beijing Research Institute of Chemical Industry
College of Polymer Science and Engineering, State Key Laboratory of Polymer Materials Engineering, Sichuan University
State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology
Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-plastics, School of Polymer Science and Engineering, Qingdao University of Science & Technology
Bohai Rim Collaborative Innovation Center on Green Chemical Application Technology, Department of Chemical Engineering, Weifang Vocational College