BAI Yungang, ZHANG Guibao, LI Baixiang, LI Yuesheng. SYNTHSIS OF HIGHLY ISOTACTIC POLYACRYLONITRILE. [J]. Acta Polymerica Sinica (3):231-238(2012)
DOI:
BAI Yungang, ZHANG Guibao, LI Baixiang, LI Yuesheng. SYNTHSIS OF HIGHLY ISOTACTIC POLYACRYLONITRILE. [J]. Acta Polymerica Sinica (3):231-238(2012) DOI: 10.3724/SP.J.1105.2012.11150.
Acrylonitrile(AN) homopolymerization and the copolymerization were examined under various conditions in the presence of anhydrous magnesium chloride (MgCl2).The polymers were obtained with high isotacticity.The effect of solvents
reaction temperature
the molar ratio of MgCl2 and AN on AN homopolymerization and the copolymerization and the tacticity of the polymers were investigated.The optimum reactive conditions to obtain the polymers with high isotacticity are as follows:hexane as the solvent
2
2'-azobisisobutyronitrile (AIBN) as the initiator
the temperature of 60℃ and the molar ratio (MgCl2/AN) of 2 ∶1.The effects of monomer concentration and initiator concentration on the AN homopolymerization
AN/IA(itaconic acid) copolymerization
AN/IA/MA(methylacrylate) copolymerization were investigated.The homopolymers and copolymers with highly triad isotactic content (30.2%~55.9%) have been obtained.The polymers were characterized by 13C-NMR and Fourier transform infrared (FTIR) spectra.At the same time
the thermal properties of the polymers were characterized by differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA).The DSC results show that the exothermic peak temperature of the copolymers increases with the degree of isotacticity
as well as the exothermic peaks of copolymers become wider.The TGA results reveal the copolymer with high isotacticity shows rapid weight loss when the temperature is higher than approximately 300℃
the char-yields and thermal stability of the copolymers are decreased with the increasing of the degree of isotacticity.
Highly-efficient Fabrication and Crystallinity and Orientation of Polyacrylonitrile Nanofibers
Preparation of Polyimide/Polyacrylonitrile Blend Black Films and Study of Their Structure and Properties
Recent Progress on Flash DSC Study of Polymer Crystallization and Melting
Synthesis and Application of Alkaline Quaternized Polyacrylonitrile in Biodiesel Producing
Preparation and Properties of Filaments Braid Tube Reinforced Hollow Fiber Membranes
Related Author
No data
Related Institution
National Engineering Lab for Textile Fiber Materials & Processing Technology (Zhejiang), Zhejiang Sci-Tech University
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology
Changzhou Institute of Advanced Materials, Beijing University of Chemical Technology
Department of Polymer Science and Engineering, MOE Key Lab of High Performance Polymer Materials, School of Chemistry and Chemical Engineering, Nanjing University
School of Materials Science and Engineering, Jiangsu University of Science and Technology