A novel sulfonic acid group-containing hyperbranched polyurethane was synthesized by the reaction of N- tris(hydroxymethyl)methyl-2-aminoethanesulfonic acid (TES) and isophorone diisocyanate (IPDI) with a one-pot method.The amino group of TES added selectively to the secondary isocyanate group of IPDI at low temperature (15℃) to afford an AB3 type monomer.The resultant AB3 monomer could be polymerized in situ at high temperature (70~90℃) to give hyperbranched polyurethanes.The degree of branching (DB)
molecular weight and molecular weight distribution (MWD) of the hyperbranched polyurethane increased with increasing polymerization temperature.The number average molecular weight (Mn)
MWD and DB of the polymer obtained at 90℃ were 22410
3.36 and 0.87
respectively.The polymer electrolytes based on the obtained hyperbranched polyurethane sulphonate had good heat stability and high tensile strength.The temperature for 1% weight loss was more than 220℃
and the tensile strength was up to 17 MPa.The ionic conductivity of the polymer electrolyte (lithium salt) was 3.110-5 S/cm at room temperature (ca.25℃)
Preparation and Electrochemical Performance of Polyzwitterion Containing Intramolecular Salt as Solid Electrolytes for Lithium-ion Batteries
Self-healing Solid-state Polymer Electrolyte Based on Zwitterions
Epoxy Resins Modified by Hyperbranched Polyurethanes with Different Composition
SYNTHESIS OF HBPS-PEO MULTI-ARM STAR POLYMER ELECTROLYTES AND THEIR IONIC CONDUCTIVITY
Related Author
No data
Related Institution
CAS Key Laboratory of Renewable Energy, Guangdong Provincial Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences
University of Science and Technology of China
School of Materials Science and Engineering, Tianjin University
School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University