6-Me2C6H3)) activated with [Ph3C]B(C6F5)4] could initiate ethylene and propylene copolymerization with high activity (7.5105g(PE)mol-1 h-1 (105Pa)-1) under the conditions of room temperature (30℃) and atomphere pressure (1.0 105 Pa).The influence of comonomer feed content and polymerization temperature on activity and the composition of the copolymers using LSc(CH2SiMe3)2/[Ph3C]B(C6F5)4] catalytic system were investigated.An increase in the initial propylene feed content leads to the increase in the incorporated propylene content of the resulting copolymer.At 30℃
the highest activity and incorporation of propylene were achieved.Determination of the reactivity ratios shows a much high reactivity for ethylene (rE=29.75 and rP=0.015).The resultant copolymers are elastomers having random sequence distibution of the two monomeric units evidenced by 13C-NMR spectroscopy and DSC analyses.
关键词
稀土配合物乙烯丙烯共聚合
Keywords
Rare earth metal complexEthylenePropyleneCopolymerization
Copolymerization of Ethylene and Conjugated Dienes Catalyzed by Half-sandwich Scandium Complexes
Synthesis and Characterization of Multi-block Polymers Consisting of Polyethylene/Ethylene-propylene Random Copolymer via [N,P]-type Non-metallocene Catalysts
Influence of Tiny Amounts of 1,4-Pentadiene on Propylene Polymerization and Polymer Properties Catalyzed by a Classical Ziegler-Natta Catalyst
Synthesis of Pyrene Based α-Diimide Nickel Catalysts for Ethylene Polymerization/Copolymerization
Synthesis of Brominated Polyolefin Rubbers
Related Author
No data
Related Institution
State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology
State Key Laboratory of Effective Utilization of Chemical Resources, Key Laboratory of Carbon Fiber and Functional Polymers of Ministry of Education, College of Materials Science and Engineering, Beijing University of Chemical Technology
University of Chinese Academy of Sciences
CAS Key Laboratory of Engineering Plastics, Institute of Chemistry, Chinese Academy of Sciences
Department of Polymer Science and Engineering, University of Science and Technology of China