The copolymer PMT82 was synthesized by free radical polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) and trimethoxysilylpropyl methacrylate (TSMA) with the monomer ratio of 8∶2.The copolymer PMT82 was dip-coated onto glutaraldehyde-crosslinked chitosan (CS-GA) surfaces to prepare phosphorylcholine-coated CS-GA film (CS-GA-PMT82a) and then stabilized by the amine-catalyzed crosslinking reactions of the trimethoxysilane groups
obtaining the phosphorylcholine-crosslinked CS-GA surfaces (CS-GA-PMT82b).The hydrophilicity and elementary composition of the modified surfaces of were characterized by dynamic contact angle (DCA) measurements and X-ray photoelectron spectroscopy (XPS).The obvious decrease in the contact angles and the new signals for P2p
Si2p and N+(CH3)3 provided strong evidences for the successful establishment of PMT82 on the CS-GA surface.The anticoagulation property of the surfaces was estimated by platelet adhesion measurements.Compared with the chitosan films
the CS-GA-PMT82b surfaces massively reduced the platelet adhesion
indicating that the cell outer membrane mimetic structures were formed on the modified surfaces with PMT82 as the coat
which led to the significantly improved anticoagulation property of the modified surfaces of the composite material.This facile method of fabricating the stable cell outer membrane mimetic surfaces by dip-coating and catalytic crosslinking may have potential applications in the fields of anticoagulation property coatings
Crosslinking Kinetics and Application of Chitosan-Genipin Nanogel
Construction of High Performance Chitosan Based Solid State Ion Thermoelectric Battery and Thermoelectric Performance
Polysaccharide Based Injectable Self-healing Hydrogels with Glucose Responsive Drug Release Behavior
Strong and Tough Chitosan Aerogels via Hofmeister Effect
Related Author
No data
Related Institution
College of Food Science and Technology, Nanjing Agricultural University
School of Applied Chemistry and Engineering, Univerdity of Science and Technology of China
State Kay Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences
Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, College of Materials Science and Engineering, Northeast Forestry University
Department of Pharmaceutical and Biological Engineering, School of Chemical Engineering, Sichuan University