高耐热可溶性含氟含吡啶环聚芳酰胺的制备及性能研究

李华; 罗松贵; 黄孝华; 刘婵娟; 韦春

doi:10.11777/j.issn1000-3304.2017.17174

您当前的位置：

首页 >

文章列表页 >

高耐热可溶性含氟含吡啶环聚芳酰胺的制备及性能研究

研究论文 | 更新时间：2021-01-26

- 高耐热可溶性含氟含吡啶环聚芳酰胺的制备及性能研究
- Preparation and Properties of High Heat-resistant Soluble Fluorinated and Containing Pyridine Ring Aromatic Polyamides
- 高分子学报 2018年0卷第5期页码：632-638
- 作者机构：
  
  桂林理工大学广西有色金属及材料加工新技术教育部重点实验室材料科学与工程学院　桂林 541004
- 作者简介：
  
  E-mail: huangxiaohua@glut.edu.cn Xiao-hua Huang, huangxiaohua@glut.edu.cn
- 基金信息：
  
  国家自然科学基金(基金号 51563005)和广西自然科学基金(基金号 2016GXNSFBA380009)资助项目()
- DOI：10.11777/j.issn1000-3304.2017.17174
  中图分类号：
- 纸质出版日期：2018-5，
  
  收稿日期：2017-7-3，
  
  修回日期：2017-7-31，
扫描看全文
李华, 罗松贵, 黄孝华, 刘婵娟, 韦春. 高耐热可溶性含氟含吡啶环聚芳酰胺的制备及性能研究[J]. 高分子学报, 2018,0(5):632-638.

Hua Li, Song-gui Luo, Xiao-hua Huang, Chan-juan Liu, Chun Wei. Preparation and Properties of High Heat-resistant Soluble Fluorinated and Containing Pyridine Ring Aromatic Polyamides[J]. Acta Polymerica Sinica, 2018,0(5):632-638.
李华, 罗松贵, 黄孝华, 刘婵娟, 韦春. 高耐热可溶性含氟含吡啶环聚芳酰胺的制备及性能研究[J]. 高分子学报, 2018,0(5):632-638. DOI： 10.11777/j.issn1000-3304.2017.17174.

Hua Li, Song-gui Luo, Xiao-hua Huang, Chan-juan Liu, Chun Wei. Preparation and Properties of High Heat-resistant Soluble Fluorinated and Containing Pyridine Ring Aromatic Polyamides[J]. Acta Polymerica Sinica, 2018,0(5):632-638. DOI： 10.11777/j.issn1000-3304.2017.17174.

摘要

以4-三氟甲硫基苯甲醛和4-硝基苯乙酮为原料，设计合成一种新型二胺单体 — 4-(4-三氟甲硫基苯基)-2

6-双(4-胺基苯基)吡啶(FTPAP)，通过傅里叶红外光谱(FTIR)、核磁共振(NMR)和质谱(MS)等对二胺单体进行结构表征. 将FTPAP分别与1

4-萘二甲酸(NDA)、4

4-二苯醚二甲酸(CPBA)、对苯二甲酸(PTA)通过Yamazaki膦酰化法制备一系列含吡啶环及大侧基三氟甲硫基苯基非共平面结构新型可溶性聚酰胺(PA). 采用FTIR，

H-NMR等对PA进行结构表征. 凝胶渗透色谱(GPC)数据显示PA具有较高的分子量和低的分散系数，相对分子量在9.30 × 10

~ 1.26 × 10

之间，分散系数范围为1.12 ~ 1.33. 结果表明：PA具有优异的溶解性能，在室温条件下可以溶解在

-甲基-2-吡咯烷酮(NMP)、二甲基亚砜(DMSO)、

-二甲基甲酰胺(DMF)等高沸点有机溶剂中，甚至在加热条件下能部分溶解于低沸点四氢呋喃(THF)、氯仿(CHCl

)溶剂中. PA呈现出优异的热稳定性和光学性能，聚合物玻璃化转变温度(

)在285 ~ 325 °C之间；在氮气氛围中5%和10%热失重时的温度范围分别为396 ~ 435 °C和430 ~ 490 °C，且残炭率都在70%以上；聚合物截止波长(

cutoff

)范围为369 ~ 384 nm，80%透过率(

80%

)的波长范围为440 ~ 478 nm；广角X射线图谱表明聚合物为无定型结构. 此外，PA薄膜具有良好的力学性能，其拉伸强度43.2 ~ 95.0 MPa，杨氏模量0.90 ~ 1.39 GPa，断裂伸长率3.3% ~ 8.8%.

Abstract

A novel diamine monomer 4-(4-trifluoromethylthiophenyl)-2

6-bis(4-aminophenyl)pyridine (FTPAP) was synthesized from 4-trifluoromethylthiobenzaldehyde and 4-nitroacetophenone by two-step reaction

and its structure was characterized

via

Fourier transform infrared spectroscopy (FTIR)

nuclear magnetic resonance (NMR) and mass spectrometry (MS). A series of novel soluble fluorinated aromatic polyamides (PA) containing pyridine ring

bulky group trifluoromethylthiophenyl and non-coplanar structure were prepared by Yamazaki phosphorylating condensation with aromatic dicarboxylic acids

such as terephthalic acid (NDA)

4-(4-carboxyphenoxy)benzoic acid (CPBA) and terephthalic acid (PTA). The structure of PA was characterized by FTIR and

H-NMR. Gel permeation chromatography (GPC) data showed that PA has a relatively higher molecular weight and a lower dispersion coefficient

and the weight-average molecular weight and molecular weight distribution of PA were in the range of 9.30 × 10

− 1.26 × 10

and 1.12 − 1.33

respectively. Obviously

PA presenting excellent solubility was not only dissolved in high boiling organic solvents

such as

-methyl-2-pyrrolidone (NMP)

dimethylsulfoxide (DMSO)

-dimethylformamide (DMF)

at room temperature

but also partially dissolved in low boiling solvents

such as tetrahydrofuran (THF) and chloroform (CHCl

) under heating. Furthermore

they also showed excellent thermal properties with the glass transition temperature (

) in the range of 285 − 325 °C under nitrogen atmosphere

and

10%

weight loss temperature in the range of 396 − 435 °C and 430 − 490 °C under nitrogen atmosphere respectively

and all with a char yield above 70%. Moreover

they also showed excellent optical properties with the cutoff wavelength ranges of 369 − 384 nm

the wavelengths of 80% transmittance above 440 nm. The result of WAXD indicated that all the polymers exhibited amorphous structure. In addition

PA films also presented good mechanical properties with the tensile strength ranged from 43.2 − 95.0 MPa

Young’s modulus from 0.90 − 1.39 GPa

and the elongation at break from 3.3% − 8.8%.

关键词

聚酰胺吡啶溶解性透明性

Keywords

PolyamidesPyridineSolubilityTransparency

references

Hsiao S H, Chen C W, Liou G S . J Polym Sci, Part A: Polym Chem , 2004 . 42 ( 13 ): 3302 - 3313 . DOI:10.1002/(ISSN)1099-0518http://doi.org/10.1002/(ISSN)1099-0518 .

Pan Y, Tang X Z . Synth Met , 2009 . 159 1796 - 1799 . DOI:10.1016/j.synthmet.2009.05.027http://doi.org/10.1016/j.synthmet.2009.05.027 .

Shiraishi K, Kanbara T, Yamamoto T, Groenendaal L B . Polymer , 2001 . 42 7229 - 7232 . DOI:10.1016/S0032-3861(01)00137-9http://doi.org/10.1016/S0032-3861(01)00137-9 .

Lewandowski S, Rejsek-Riba V, Bernes A, Perraud S, Lacabanne C . J Appl Polym Sci , 2016 . 133 1 - 7.

Jessop I A, Tundidor-Camba A, Terraza C A, Gonzalez-Henriquez C M, Tagle L H . J Appl Polym Sci , 2016 . 133 ( 29 ): 1 - 9.

Bell E A, Holloway R W, Cath T Y . J Membr Sci , 2016 . 517 1 - 13 . DOI:10.1016/j.memsci.2016.06.014http://doi.org/10.1016/j.memsci.2016.06.014 .

Xu Chang(徐常), Chen Yunyun(陈云云), Chen Wentao(陈文涛), Gong Liyao(贡凌垚), Wang Chenyi(汪称意), Li Jiang(李坚), Ren qiang(任强). Polymeric Materials Science and Engineering(高分子材料科学与工程), 2015, 31(10): 6 – 10

Lin C H, Wong T I, Wang M W, Chang H C, Juang T Y . J Polym Sci, Part A: Polym Chem , 2015 . 53 513 - 520 . DOI:10.1002/pola.v53.4http://doi.org/10.1002/pola.v53.4 .

Jia Lan(贾兰), Xu Jianping(徐建平), Ji Jian(计剑), Shen Jiancong(沈家骢). Acta Polymerica Sinica(高分子学报), 2008, (11): 1108–1112

Terraza C A, Tagle L H, Munoz D, Tundidor-Camba A, Ortiz P A , Coll D, Gonzalez-Henriquez C M, Jessop I A . Polym Bull , 2016 . 73 ( 4 ): 1103 - 1117 . DOI:10.1007/s00289-015-1537-7http://doi.org/10.1007/s00289-015-1537-7 .

Sun Tingjie(孙同杰), Dong Xia(董侠), Hu Haiqing(胡海青), Wang Dujin(王笃金). Acta Polymerica Sinica(高分子学报), 2014, (4): 427 – 440

Li Penghui(李鹏辉), Wang Chenyi(汪称意), Li Guang(李光), Jiang Jianming(江建明). China Plastics(中国塑料), 2009, 23(9): 30 – 35

Tapaswi P K, Choi M C, Nagappan S, Ha C S . J Polym Sci, Part A: Polym Chem , 2015 . 53 479 - 488 . DOI:10.1002/pola.v53.3http://doi.org/10.1002/pola.v53.3 .

Qiu Guoquan(仇国全), Chen Beicai(陈焙才), Huang Xiaohua(黄孝华), Liu Chanjuan(刘婵娟), Wei Chun(韦春). Journal of Functional Polymer(功能高分子学报), 2017, 30(1): 116 – 120

Feng Zongcai(冯宗财), Yu Yawen(余亚文), Liu Fang(刘芳), Song Xiumei(宋秀美), Chen Lin(陈林), Zhao Liyun(赵丽云). Polymeric Materials Science and Engineering(高分子材料科学与工程), 2015, 31(9): 23 – 27

Yang Lulu(杨路路), Chen Beicai(陈焙才), Huang Xiaohua(黄孝华), Liu Chanjuan(刘婵娟), Wei Chun(韦春). Acta Polymerica Sinica(高分子学报), 2017, (6): 946 – 951

Sweileh B A, Khalili F I, Hamadneh I, Al-Dujaili A H . Fiber Polym , 2016 . 17 ( 2 ): 166 - 173 . DOI:10.1007/s12221-016-5400-8http://doi.org/10.1007/s12221-016-5400-8 .

Liaw D J, Chen W H, Hu C K, Lee K R, Lai J Y . Polymer , 2007 . 48 ( 22 ): 6571 - 6580 . DOI:10.1016/j.polymer.2007.08.041http://doi.org/10.1016/j.polymer.2007.08.041 .

Xu X, Chen B C, Li H, Huang X H, Liu C J . Chin J Chem , 2017 . 35 341 - 346 . DOI:10.1002/cjoc.v35.3http://doi.org/10.1002/cjoc.v35.3 .

Ge Z, Yang S, Tao Z, Liu J, Fan L . Polymer , 2004 . 45 ( 11 ): 3627 - 3635 . DOI:10.1016/j.polymer.2004.03.037http://doi.org/10.1016/j.polymer.2004.03.037 .

更多指标>

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

含异丙基及三氟甲基可溶性聚酰胺的合成及性能研究

侧基可脱除共轭聚合物的合成及其在光电探测器中的应用

含功能化咪唑鎓离聚物增韧改性聚乳酸的研究

氮杂环单体的分子结构对共聚芳醚酮酮性能的影响

含二氮杂萘酮联苯结构耐高温、可溶解嵌段聚芳醚酮的合成