利用水的相变热调控聚丙烯发泡材料的泡孔结构

李明罡; 樊东蕾; 邱健; 邢海平; 姜治伟; 唐涛

doi:10.11777/j.issn1000-3304.2017.17283

您当前的位置：

首页 >

文章列表页 >

利用水的相变热调控聚丙烯发泡材料的泡孔结构

快报 | 更新时间：2021-01-26

- 利用水的相变热调控聚丙烯发泡材料的泡孔结构
  增强出版
- Controlling Cellular Structure of Polypropylene Foams through Heat of Phase Transition of Water
- 高分子学报 2017年第12期页码：1851-1855
- 作者机构：
  
  高分子物理与化学国家重点实验室中国科学院长春应用化学研究所长春 130022
- 作者简介：
  
  姜治伟, E-mail: jiangzw@ciac.ac.cn Zhi-wei Jiang, E-mail:jiangzw@ciac.ac.cn
  唐涛, E-mail: ttang@ciac.ac.cn Tao Tang, E-mail: ttang@ciac.ac.cn
- 基金信息：
  
  国家自然科学基金委(21304089);国家自然科学基金委(51233005);国家高技术研究发展计划(863计划);国家高技术研究发展计划(2015AA033901)
- DOI：10.11777/j.issn1000-3304.2017.17283
  中图分类号：
- 纸质出版日期：2017-12-20，
  
  收稿日期：2017-10-7，
  
  修回日期：2017-11-9，
扫描看全文
李明罡, 樊东蕾, 邱健, 邢海平, 姜治伟, 唐涛. 利用水的相变热调控聚丙烯发泡材料的泡孔结构[J]. 高分子学报, 2017,(12):1851-1855.

Ming-gang Li, Dong-lei Fan, Jian Qiu, Hai-ping Xing, Zhi-wei Jiang, Tao Tang. Controlling Cellular Structure of Polypropylene Foams through Heat of Phase Transition of Water[J]. Acta Polymerica Sinica, 2017,(12):1851-1855.
李明罡, 樊东蕾, 邱健, 邢海平, 姜治伟, 唐涛. 利用水的相变热调控聚丙烯发泡材料的泡孔结构[J]. 高分子学报, 2017,(12):1851-1855. DOI： 10.11777/j.issn1000-3304.2017.17283.

Ming-gang Li, Dong-lei Fan, Jian Qiu, Hai-ping Xing, Zhi-wei Jiang, Tao Tang. Controlling Cellular Structure of Polypropylene Foams through Heat of Phase Transition of Water[J]. Acta Polymerica Sinica, 2017,(12):1851-1855. DOI： 10.11777/j.issn1000-3304.2017.17283.

摘要

为了控制发泡体内部泡孔结构，以制备聚丙烯（PP）泡沫为例，提出在CO

作为发泡剂进行物理发泡过程中，以水为助发泡剂，利用其发泡过程中汽化吸热，原位冷却发泡体内部.将PP与聚乙二醇（PEG）熔融共混制备共混物（PP/PEG），PEG的存在赋予了共混物吸水的能力.采用红外线成像仪测试发泡体表层和芯部温度，利用扫描电子显微镜表征了泡孔结构.结果表明，与纯PP发泡体相比，在同样发泡条件下，PP/PEG共混物发泡体内部温度明显降低，内部与表层泡孔结构相近，且发泡倍率提高.进一步分析讨论了PP/PEG共混物发泡体内部温度明显降低的机理.这种方法适用于不同聚合物体系和不同发泡工艺，如：模压、挤出、釜式发泡工艺.

Abstract

At present

a problem in the field of polymer foaming is how to efficiently prepare polymer foamed products with large size

especially for semi-crystalline polymers (for example

polypropylene (PP)). A difficulty is that the polymer melt inside the foam samples cannot be quickly cooled after the formation of foam structure

resulting in collapse and merging of the cell structure

which may lead to form the gradient cellular structure between inside and outer layers. This problem severely restricts the development of polymer foaming technology and the application of foam products. In this work

we use PP as an example to demonstrate a novel foaming method with water as an

in situ

cooling medium for the first time. PP/hydrophilic polyethylene glycol (PP/PEG) blends are prepared by melt mixing

and then the blends are subjected to moulding physical foaming using CO

as a foaming agent and water as an assistant foaming agent. The temperatures in the surface and core of the foamed samples are measured by the infrared imager. The results show that the addition of PEG makes PP has an ability to absorb water in the saturation stage. Owing to the water penetrating into the PP/PEG samples

the adsorption amount (

) of foaming agent for PP/PEG blends is significantly higher than that for pure PP. In the foaming processing

water can quickly vaporize as a co-foaming agent. At the same time

the vaporization of water absorbs a lot of heat

which leads to the temperature drop in the inside of foam samples. Therefore the foam structures are cooled and shaped. As a result

under the same foaming conditions

the internal temperature of the PP/PEG foam is quickly fallen

and the foaming materials with higher expansion ratio are obtained compared with the case of pure PP. The mechanism of the obvious reduction in internal temperature of PP/PEG foam is discussed. This method has a universality

which can be applied in different polymer systems and different foaming processes such as moulding foaming

extrusion foaming and batch foaming.

关键词

聚丙烯泡沫发泡剂原位冷却结构调控

Keywords

Polypropylene foamFoaming agentIn situ coolingStructural control

references

Wong A, Leung S N, Hasan M M, Park C B. In:Society of Plastics Engineers Annual Technical Conference. Milwaukee:Society of Plastics Engineers, 2008. 2534-2538

Z M Xu , X L Jiang , T Liu , G H Hu , L Zhao , Z N Zhu , W K Yuan . J Supercrit Fluid , 2007 . 41 299 - 310 . DOI:10.1016/j.supflu.2006.09.007http://doi.org/10.1016/j.supflu.2006.09.007.

A Wong , Y Guo , C B Park . J Supercrit Fluid , 2013 . 79 142 - 151 . DOI:10.1016/j.supflu.2013.02.013http://doi.org/10.1016/j.supflu.2013.02.013.

B Wang , M Wang , Z Xing , H Zeng , G Wu . J Appl Polym Sci , 2012 . 37826 .

M Lee , C Tzoganakis , C B Park . Polym Eng Sci , 1998 . 38 1112 - 1120 . DOI:10.1002/(ISSN)1548-2634http://doi.org/10.1002/(ISSN)1548-2634.

A Xue , C Tzoganakis . J Polym Eng , 2003 . 23 1 - 22 . DOI:10.1515/POLYENG.2003.23.1.1http://doi.org/10.1515/POLYENG.2003.23.1.1.

D Raps , T Köppl , L Heymann , V Altstädt . Rheol Acta , 2017 . 56 95 - 111 . DOI:10.1007/s00397-016-0988-6http://doi.org/10.1007/s00397-016-0988-6.

C X Chen , Q Q Liu , X Xin , Y X Guan , S J Yao . J Supercrit Fluid , 2016 . 117 279 - 288 . DOI:10.1016/j.supflu.2016.07.006http://doi.org/10.1016/j.supflu.2016.07.006.

R Gendron , M F Champagne . J Cell Plast , 2006 . 42 127 - 138 . DOI:10.1177/0021955X06060948http://doi.org/10.1177/0021955X06060948.

Y W Luo , C L Xin , J Sun , B R Yan , Y D He . Adv Mater Res , 2013 . 748 112 - 116 . DOI:10.4028/www.scientific.net/AMR.748http://doi.org/10.4028/www.scientific.net/AMR.748.

Haynes W M, Lide D R, Bruno T J. CRC Handbook of Chemistry and Physics, 95th ed. Boca Raton:CRC Press. Chapter 6:2

更多指标>

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据